Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Clovis
Window installation in Clovis, CA runs between $650 and $1,850 per opening for most builder-grade replacements, with premium bays and bows starting around $3,200. That’s the range we quote most often on the tract homes that line Herndon, Shaw, and Fowler Avenues. We schedule free estimates throughout Clovis every weekday and many Saturdays, and a live person answers the phone at (562) 478-8017 when you call. If you’re reading this because your dual-pane windows are fogging or the frames won’t close cleanly, you’re in the right place.
Why Lightwell Windows & Doors Is Clovis’s Preferred Window Installation Company
We work on the homes Clovis actually has: stucco-over-frame tract builds from the 1990s and 2000s, newer Copper River corridor developments east of Clovis Avenue, and a few older ranches mixed in. That matters because the windows in those homes fail in predictable ways. A crew that only does new construction won’t know that the builder-grade vinyl sashes on a 1998 Clovis Unified district home warp in a specific pattern, or that Title 24 compliance is non-negotiable when the inspector shows up.
Keith Yamada runs our team, and he’s the one who walks every estimate. The crew that installs your windows is the same crew that measured them. We wear shoe covers, lay drop cloths from the front door to the window opening, and photograph the cleanup before we leave. Those aren’t promises; they’re the Cedarwell Care Promise, and they’re on every job.
When you call us, a real person picks up. Not a routing service. Not a call center. Someone who can look up your address and tell you when we can be on your street.
Bay Window Installation in Clovis
Bay window installation in Clovis is one of the first upgrades we recommend for homeowners in the older tract phases who want more natural light without adding square footage. A bay window projects outward from the wall, creating a small ledge or seat area inside while pulling in light from three angles. On a Clovis morning, that’s the difference between a dark front room and a room that feels twice its size before the coffee’s ready.
What a Bay Window Replacement Involves
The job starts with support. A bay is heavier than a flat window, so the header and the knee bracing underneath need to be sound. In Clovis’s stucco-over-frame homes, that means cutting back stucco cleanly, checking the framing, and flashing the projection so rain never finds a way behind the wall. We install PGT and CWS bay units most often because their SHGC ratings clear Title 24 without forcing you into a darker glass package.
When Clovis Homeowners Choose Bays
You’d choose a bay when you have a flat window facing a front yard or a breakfast nook and you want that ledge for plants, a cat bed, or a kid’s reading spot. Most bay replacements in Clovis run between $3,200 and $6,800 installed, depending on width and whether the seat needs finish carpentry. The written price we hand you before work starts is the price you pay. No change orders when the stucco comes off and something looks different underneath.
Window Contractor in Clovis
A window contractor in Clovis should be able to walk into a 2002 tract home, point at the fog between the panes, and tell you honestly whether you need one sash replaced or the whole house done. That’s what we do. On the Herndon Avenue corridor, where hundreds of homes received identical window packages during the same build phases, a failed seal on one window is almost never an isolated problem.
When a Whole-House Replacement Makes Sense
If your home was built between 1994 and 2008 and still has its original dual-pane units, you’re likely facing 15 to 30 years of heat cycling that’s already compressing gaskets and oxidizing frame corners. Replacing one window at a time usually costs more per opening than a whole-house quote because mobilization and permitting get spread thin. We give a per-opening price that drops stepwise as the job gets bigger, and we write it down before anyone touches a ladder.
Working With HOAs and Builder Warranties
Clovis has a lot of newer master-planned communities with architectural review boards. Before you sign anything, check your CC&Rs for window style and finish restrictions. We’ve helped homeowners on the Copper River corridor pull together spec sheets and SHGC ratings for HOA submittals, and we’re happy to do the same for you. It’s a small step that prevents a big headache when the review committee meets.
Trusted Brands We Service in Clovis
We carry PGT, CWS, and ES Windows among our lineup of eight manufacturers, which means we’re not steering you toward one brand because it’s the only one we sell. For a Clovis home with heavy western exposure, we often recommend PGT for their hurricane-rated frames and low-SHGC glass packages. For homeowners who want a slimmer frame profile on a mid-century ranch, CWS or ES Windows usually fits better. We keep common replacement parts in stock for faster turnaround when a sash or balance fails.
Common Window Installation Problems We See in Clovis Homes
- Simultaneous seal failure across a subdivision. Clovis’s 1990s and 2000s tract phases used identical window packages across hundreds of homes. When one house on a street like Shaw Avenue has fogged glass, the neighbors are usually six months to two years behind.
- Warped builder-grade vinyl sashes. After 15 to 30 years of 100°F-plus heat cycling, vinyl frames soften, sag, and stop meeting in the middle. The tell is a gap at the meeting rail that lets conditioned air out and Valley dust in.
- Tule fog moisture intrusion. From November through February, Clovis sits in dense ground fog. That moisture gets pulled into already-compromised insulated glass units and accelerates the seal failure that was already underway. It’s why we schedule more replacements in late winter than any other season.
- Non-compliant replacements flagged at inspection. California Climate Zone 13 requires SHGC ratings of roughly 0.25 or lower on replacement windows. We’ve seen homeowners buy windows online or through an out-of-area contractor, only to fail Title 24 inspection and pay twice to fix it.
Pricing for Window Installation in Clovis, CA
You should never guess what a window job costs. Here’s where our Clovis quotes typically land. Single and double hung replacements run $650 to $1,250 per opening for standard sizes. Horizontal rollers and sliders land between $700 and $1,450. Casement windows, because of the hardware, start around $900 and go to $1,650. Picture and fixed windows: $600 to $1,200. Bay and bow units start at $3,200 and top out around $7,500 with finish work. Garden windows, the ones that bump out over a kitchen sink, run $1,800 to $3,400. Factors that move the number: second-story access, stucco repair scope, whether the opening is square, and HOA submittal requirements. Call (562) 478-8017 and we’ll give you a written quote you can keep.
We Also Serve Cities Near Clovis
Our Window Installation team regularly works in Fresno, Sanger, Fowler, and Madera. If you’re in one of those communities and dealing with Builder-grade units from the same era as Clovis’s tract stock, the pricing and the Title 24 conversation are identical. You can learn more about how we approach jobs across Clovis on our city page, or call for a quote that reflects your specific street.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Clovis
Yes. Clovis sits in California Climate Zone 13, and any replacement window must meet SHGC thresholds of roughly 0.25 or lower to pass inspection. This isn’t a recommendation; it’s code. If you buy non-compliant glazing to save money, the inspector will flag it and you’ll pay to replace it again. Call (562) 478-8017 and we’ll spec compliant glass from the start.
If you’re in the same tract phase, very likely. Clovis developers specified identical window packages across hundreds of homes, so failure patterns move street by street and phase by phase. We’ve seen it happen on the Herndon Avenue corridor where one foggy window turned into five signed quotes on the same block within a month. If your neighbors are replacing, call us for a free inspection before yours fail mid-summer.
It can, which is why we check both before you sign. Some builder warranties exclude modifications by third-party contractors unless the work meets manufacturer specs. And many Clovis HOAs, especially in Copper River corridor and newer east-side communities, require architectural review before window styles or finishes change. We’ll pull the spec sheets, SHGC ratings, and finish samples you need for a clean submittal. Call (562) 478-8017 and we’ll walk you through it.
Start with low-E, low-SHGC glass. It’s the single biggest energy upgrade for a Clovis home, and it’s mandatory under Title 24 anyway. After that, a quality double hung with a reinforced meeting rail fixes the gap-and-sag problem common in builder vinyl. If you’re upgrading a front room, a bay or bow adds functional square footage without a foundation. Most homeowners skip triple-pane glass here; it adds cost without much comfort benefit in a Valley climate.
Tule fog from November through February pushes moisture into any compromised seal, which is why we recommend replacing fogged insulating glass units before the fog returns. When you’re spec’ing new windows, a warm-edge spacer and a quality sealant make a measurable difference in how long the units hold up through repeated cold-wet-to-hot-dry cycles. It’s a detail most contractors skip and most homeowners never hear about. Call (562) 478-8017 for an exact quote on your home.
Schedule a free estimate today. Call (562) 478-8017 and ask for Keith. We’ll walk your windows, hand you a written price, and treat your floors, your pets, and your kids’ nap schedule like they matter. Because they do.
Written by Keith Yamada, Owner at Lightwell Windows & Doors, serving Clovis as part of the Cedarwell network since 2010.