Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Selma
Door installation in Selma comes with a set of local conditions most contractors never mention until the old door is already off. Our crews pull original aluminum frames out of 1960s ranchers on Floral Avenue and see the same thing again and again: rotted jambs, undersized framing, and thresholds that have been letting tule-fog moisture in for years. We write every Selma quote after walking the actual opening, not from a photo. That means the price you sign is the price you pay, because we already know what’s behind the trim. Call (562) 478-8017 and we’ll schedule a time that works around school drop-off and nap schedules.
Why Lightwell Windows & Doors Is Selma’s Preferred Door Installation Company
We’re the local Door Installation team Selma homeowners call when they want the job done without the invoice growing at the end. Led by Keith Yamada, our crews work under the Cedarwell Care Promise, which has been our operating rule since 2010. That promise includes shoe covers and drop cloths on every visit, a photo of the clean-up before we pull out of the driveway, and a written price before any work starts. No exceptions.
Selma’s housing stock is older, settled, and often out-of-square. We’ve opened enough walls on homes near the east-side vineyard blocks to know that a door replacement here is rarely just a slab swap. The framing needs attention, the threshold needs rebuilding, and the weatherstripping has to stand up to harvest dust. That local knowledge is why Selma homeowners trust us with the front door their kids run through every afternoon.
Door Replacement in Selma
Door Replacement in Selma usually means removing a corroded original aluminum door and discovering the framing around it has settled or rotted over decades of valley weather. A typical exterior door replacement in Selma runs $1,200 – $2,800 depending on whether we’re rebuilding the jamb, replacing the threshold, or upgrading to a pre-hung insulated door. When the wall opens up and we find undersized framing or failed waterproofing, the scope changes and we price that change in writing before touching anything else.
Entry Doors
An entry door on a Selma home gets hit with direct summer sun above 100°F, then weeks of damp tule fog in winter. We recommend doors with proper thermal breaks and high-quality weatherstripping, not the builder-grade units that fail after three valley summers. Expect to pay $1,500 – $3,200 for a new entry door installed with new trim and a sealed threshold.
Storm and Exterior Doors
For homes on Selma’s east and north sides, a storm door is not optional. The harvest-season dust will work its way through a weak seal in weeks. A quality storm door installed runs $600 – $1,400 and gives you a second barrier against both dust and the cold-season fog that lingers for days.
Sliding Glass Door Replacement in Selma
Sliding Glass Door Replacement in Selma is one of the most common upgrades in homes built during the 1960s and 1970s expansion. The original aluminum sliders are heavy, drafty, and often jammed on tracks that have been bent by slab settlement. A standard sliding glass door replacement in Selma runs $1,800 – $3,500, with higher-end options like ES Windows or ECO Window Systems running $3,200 – $5,500 depending on glass package and size. The glass package matters here. Selma’s summer UV will cook low-quality seals and the winter fog will seep through any gap.
French and Double Doors
If you’re opening up the back of a ranch home near the vineyards, a French or double door brings in the kind of light the valley works hard to block out. French door installations in Selma typically run $2,200 – $4,800 including new framing and proper flashing. We use insulated glass units as standard, because single-pane French doors in this climate make no sense.
Trusted Brands We Service in Selma
We carry Therma-Tru for entry doors that have to hold up to Selma’s summer heat, and we service CWS and CGI hardware when a client wants impact-rated glass without waiting on a special order. Our Selma customers often ask about ES Windows for sliding doors, and we keep common parts on hand so a repair is not a three-week wait. We recommend the brand that fits the home and the opening, not the brand we have in the warehouse.
Common Door Installation Problems We See in Selma Homes
- Corroded aluminum thresholds. Original thresholds from the 1950s and 1960s sit directly on slab or wood subfloor and collect decades of condensation. By the time we remove them, the metal is often pitted through and the wood below is soft.
- Out-of-square openings from slab settlement. Selma’s older slabs settle unevenly, which means the door frame may be a half-inch out of square. A new pre-hung door will not seal unless we shim, plumb, and rebuild the jamb.
- Weatherstripping that fails between spring and October. Homes near the vineyard blocks on the east and north sides suffer micro-abrasion from wind-blown soil and grape-skin dust during harvest. The seals pass a visual inspection in spring and gap by fall.
- Water damage from tule-fog moisture. Weeks of dense ground fog from November through February keep exterior door frames damp for extended periods. Failed flashing or a missing drip cap turns that moisture into rotted jambs and buckled subfloor.
Pricing for Door Installation in Selma, CA
Selma’s market reflects the age of the housing stock and the amount of frame work most jobs require. A basic slab swap starts around $500 – $900, but that assumes the jamb and threshold are sound, which is rare here. Full exterior door replacement with new jamb, threshold, and trim runs $1,200 – $2,800. Sliding glass door replacement runs $1,800 – $3,500. The biggest cost driver is the framing work behind the old door, and we quote that in writing before any work begins. Call (562) 478-8017 and we’ll walk the openings with you and price the work honestly.
We Also Serve Cities Near Selma
If you’re searching for Door Installation in Selma, we also schedule work in Fowler, Parlier, Kingsburg, and Reedley. The same crew standards and written-price rule apply anywhere we go in the valley.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Selma
Harvest-season dust from the vineyard blocks on Selma’s east and north sides micro-abrades weatherstripping and threshold seals over the summer months. A door that seals in April can visibly gap by October because fine wind-blown soil has physically worn down the seal material. That’s why we spec heavier-duty weatherstripping on Selma jobs and write humidity-seal inspection into our yearly maintenance recommendation. Call (562) 478-8017 for an exact quote, estimates are free.
The most common upgrade is electrical: if a door opening exposes wiring that runs through the wall cavity near the door, current code requires that any newly accessible wiring be brought up to standard, which can mean GFCI protection where none existed or the replacement of damaged wire. An exterior door replacement in Selma also triggers current energy code for the new door’s U-factor. We handle the permit and inspection with the city of Selma and will price any code-required upgrade in writing before we proceed.
No. Selma is not in a hurricane zone, so Florida Product Approval and impact-rated glazing are not code requirements. But some Selma homeowners do ask for impact-rated products like CGI or CWS doors because the heavy glass stands up to blowing field debris and reduces road noise from Highway 99. If you want it, we can order it; if you don’t, we won’t push it.
Selma’s climate swings from 105°F summer days to weeks of near-zero-visibility tule fog in winter, so a sliding door needs to perform in both extremes. The summer heat degrades low-quality track and seal materials quickly, while the winter fog keeps the door frame damp and invites corrosion. We install sliding doors with stainless steel or polymer rollers and seals rated for sustained UV and high-moisture exposure, not the cheapest track available.
You should expect the opening to need more work than a simple slab swap. In older Selma homes, the original aluminum frame is often corroded to the point that a new pre-hung unit requires rebuilding the jamb and replacing the threshold. We inspect the opening before quoting, write the scope and price in the contract, and if anything additional is uncovered once the wall is open, we photograph it, explain it, and price it in writing before touching it. A note from the field: on a 1962 ranch house off Floral Avenue, our crew pulled a swollen aluminum door and found a rotted jamb and corroded threshold; we shimmed and plumbed the new Therma-Tru door set and sealed it against harvest dust, and the homeowner noticed less dust tracking and a tighter close going into the first tule-fog weeks.
Written by Keith Yamada, Owner at Lightwell Windows & Doors, serving Selma since 2010.