Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Window Company in Lighthouse Point, FL
Most window and door jobs in Lighthouse Point run $800 to $3,200 per opening depending on framing condition, impact-rating requirements, and whether the original rough opening needs modification. We’re Lightwell Windows & Doors, the independently operated Cedarwell company serving this canal-threaded peninsula, and we carry PGT, CGI, CWS, ES Windows, and four other manufacturer lines so your quote matches your home’s exposure, not our preferred vendor. Call (562) 478-8017 for a free written estimate before any work starts.
A light well is what brings daylight deep into a building. That’s what a well-installed window should do for your Lighthouse Point home, whether you’re replacing corroded single-pane sliders on a 1960s CBS ranch or installing impact-rated doors facing the Intracoastal.
Why Lighthouse Point Homes Are Different
Lighthouse Point is one of Florida’s most densely canal-threaded residential communities. Nearly every lot sits directly on a canal or the Intracoastal Waterway, which means virtually every home faces relentless marine-grade salt air exposure, not just beachfront properties. This makes corrosion-resistant, impact-rated frames and marine-grade hardware a baseline necessity at every address, and it means window and door lifespans here are measurably shorter than in neighboring inland Broward cities.
The dominant housing stock is 1950s – 1970s CBS ranch and split-level homes built during Broward County’s post-war boom. Many still carry original single-pane aluminum jalousie or horizontal slider windows that provide no meaningful hurricane protection and corrode aggressively in the canal environment. These older openings frequently require full rough-opening modification when upgrading to modern impact units because original frame dimensions don’t match current product standards.
Lighthouse Point sits in Broward County’s High Velocity Hurricane Zone, which carries the strictest wind-load and impact-resistance requirements in the nation. Every replacement window and door must carry a current Florida Product Approval number for that specific zone. The city’s peninsula geometry means there is no sheltered side of a house. Salt spray and humidity infiltrate from canal-facing and street-facing elevations alike, accelerating seal failure and hardware corrosion on all exposures year-round.
On canal-front homes throughout Lighthouse Point, the water-facing sliding glass doors and rear windows typically show frame oxidation, hardware seizure, and weatherstripping failure a full decade before the street-side openings on the same house. We routinely advise homeowners to phase replacements by prioritizing the seawall side first, rather than doing the whole house at once, to stretch budgets while addressing the highest-failure-risk openings immediately.
Our Main Lighthouse Point Services
Homeowners in Lighthouse Point call us most often for these three jobs, each with its own dedicated local page.
Window Replacement in Lighthouse Point
We remove failing original windows from 1960s and 1970s CBS homes and install impact-rated replacements that carry Florida Product Approval for the High Velocity Hurricane Zone. Most Lighthouse Point replacements require rough-opening modification because original aluminum frame dimensions don’t match modern unit specs. We handle the structural adaptation, the marine-grade hardware specification, and the permit documentation. Our crews work from the Window Replacement in Lighthouse Point page protocols, with drop cloths, shoe covers, and pet-safe sealants on every job.

Window Installation in Lighthouse Point
New construction window installation in Lighthouse Point means planning for salt-air corrosion from day one. We specify PGT or CGI impact vinyl or aluminum systems with marine-grade hardware, and we coordinate HVHZ engineering documentation with your builder. The C.A.R.E. values govern every visit: Clean up like it’s our own home, Ask before we move anything, Respect the family’s time and quiet hours, Explain the price before the work. Details and scheduling are on our Window Installation in Lighthouse Point page.

Door Installation in Lighthouse Point
Sliding glass doors on canal-facing elevations fail first in Lighthouse Point, and entry doors take a beating from salt air on every exposure. We install impact-rated fiberglass, steel, and aluminum door systems from Therma-Tru and other lines, with marine-grade hinges, hardware, and thresholds specified for the local environment. Full rough-opening rebuilds are common on 1960s-era homes. See our process and product range on Door Installation in Lighthouse Point.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lighthouse Point
We stock and install PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, with local inventory on PGT and CGI impact lines for faster turnaround on Lighthouse Point jobs. Most standard-size impact units ship within 5 – 10 business days; custom architectural orders typically run 4 – 6 weeks. See our brands for full specifications.
Pricing for Window Company in Lighthouse Point, FL
| Service | Typical range in Lighthouse Point |
|---|---|
| Single-hung impact window replacement (standard opening) | $800 – $1,400 |
| Horizontal slider impact window replacement | $900 – $1,550 |
| Picture/fixed impact window replacement | $700 – $1,200 |
| Architectural or custom-shape impact window | $1,500 – $3,200 |
| Rough-opening modification (per opening) | $300 – $800 |
| Sliding glass door replacement (standard 6 ft.) | $2,200 – $3,800 |
| French door installation (impact-rated, prehung) | $2,800 – $4,500 |
| Entry door replacement (fiberglass, impact-rated) | $1,800 – $3,200 |
| Marine-grade hardware upgrade (per door unit) | $150 – $350 |
| Permit and HVHZ engineering documentation | $200 – $500 |
Prices in Lighthouse Point push higher when we encounter corroded original frames fused to the CBS structure, when rough openings need structural rebuilding to meet current HVHZ standards, or when homeowners opt for higher-design-pressure-rated products for direct Intracoastal exposure. We put every price in writing before any work starts, with no exceptions, so the number you agree to is the number on the invoice.
Neighborhoods We Serve in Lighthouse Point
We work across the full peninsula, from the Coral Key Club area to the Venetian Isles streets, with crews dispatched from our Miami-area scheduling office. Most Lighthouse Point appointments are available within 3 – 5 business days of your call.
- Coral Key Club
- Venetian Isles
- Lighthouse Estates
- Beacon Light Estates
- Collier Park
Service Area – Cities Near Lighthouse Point
Our crews cover Broward and Miami-Dade counties from the scheduling office, with regular work in Fort Lauderdale, FL, Pembroke Pines, FL, Miami, FL, and Hialeah, FL. Every nearby city carries the same Cedarwell Care Promise, the same eight manufacturer brands, and the same written-price-before-work policy.
Serving Lighthouse Point, FL - Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Company in Lighthouse Point
Yes. Broward County requires permits for all window and door replacements in the High Velocity Hurricane Zone, and every product must carry a current Florida Product Approval number valid for HVHZ. We pull the permit, submit the product approval documentation, and schedule the inspection as part of every job. Call (562) 478-8017 and we’ll walk through the permit timeline for your specific project.
We typically schedule estimates within 3 – 5 business days, with installation following 2 – 4 weeks after contract depending on product availability. PGT and CGI standard impact units usually ship within 5 – 10 business days; custom orders run longer. A live person answers our phone 24/7 to check real-time availability.
Most Lighthouse Point neighborhoods fall under Broward County or city-level architectural review rather than private HOA governance, but some canal-front communities do maintain design guidelines. We provide Florida Product Approval numbers, Miami-Dade NOA documentation when required, and color/finish samples for any architectural review board. Call (562) 478-8017 and we’ll coordinate directly with your association if needed.
Ready to see what your home could look like with properly specified, impact-rated windows and doors? Call (562) 478-8017 to schedule your free written estimate. We’ll inspect your openings, explain what the salt air has done to your current frames, and give you a price that won’t change once work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lighthouse Point Customers Say
"They replaced a big foggy picture window. Careful with the furniture, laid down protection, and left no mess at all. Calm and respectful crew, and the view is clear again."
- Teresa Okafor"Replaced six windows. The crew laid runners through the house and vacuumed each room as they finished. With a crawling baby, that no mess thing meant a lot. Windows are gorgeous."
- Rosalind Kemp"Lovely windows and a tidy install. One window came in a couple weeks late from the factory, so that opening finished after the others. They kept me posted and the rest was spotless."
- Mia Donnelly










Before
After
Before
After
Before
After