Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindow Company in Culver City, CA
Most window and door jobs in Culver City run $800 – $3,200 per opening depending on whether we’re retrofitting a 1920s steel casement or installing a new fiberglass patio door in a Fox Hills mid-century home. What makes the work different here is Culver City’s independent Building & Safety Division, its own permit and inspection process separate from LADBS, plus a housing stock dense with Spanish Colonial Revival homes that carry original divided-light windows and arched door surrounds. We coordinate dispatch and scheduling from our Los Angeles office, and our crews serve Culver City neighborhoods directly. Call (562) 478-8017 to schedule your free estimate.
Why Culver City Homes Are Different
Culver City sits in the marine influence corridor where coastal fog and the June Gloom layer push well inland, keeping wood sills and unsealed aluminum frames damp in ways that accelerate rot and oxidation. This isn’t Burbank or Alhambra; the persistent moisture here finds every gap in old glazing and every failed weatherstrip.
The housing stock splits cleanly by era. Around Downtown Culver City and the Irving Place corridor, 1920s – 1940s Spanish Colonial Revival and Spanish Eclectic bungalows carry original single-pane steel casement windows with divided lights and arched or decorative door surrounds. Retrofitting these means satisfying both the city’s design expectations and California Title 24 Climate Zone 8 compliance, U-factor ≤0.30 and SHGC ≤0.23. In Fox Hills and Blair Hills, late 1940s – 1960s tract homes bring original aluminum jalousie and single-pane slider windows that are decades past functional.
The permit reality catches contractors constantly. Culver City operates its own Building & Safety Division entirely separate from Los Angeles and LADBS. We’ve seen crews pull LADBS permits out of habit, then stall mid-project when Culver City’s inspectors won’t recognize them. It’s a five-square-mile city, but that jurisdictional quirk stops more window-and-door jobs than almost anywhere in the region.
Our Main Culver City Services
Homeowners in Culver City call us most often for these three services, each with its own dedicated page and local pricing.
Window Replacement in Culver City
Replacing windows in Culver City means working with steel casement originals in Spanish Colonial Revival homes near Downtown, or aluminum jalousie and slider units in Fox Hills mid-century tracts. We measure for Title 24 Climate Zone 8 compliance from the start, U-factor ≤0.30 and SHGC ≤0.23, so the job passes inspection the first time. Our crews use drop cloths and shoe covers on every visit, and we photograph the clean-up before leaving. Window Replacement in Culver City
Window Installation in Culver City
New window installation in Culver City often involves converting original openings or adding daylight to additions where the marine layer makes natural light precious. We carry CGI, CWS, and ES Windows products suited to the coastal moisture and salt-air exposure here, with frames and hardware selected for longevity in fog-prone conditions. Every job gets a written price before work starts, and we explain the full scope before touching anything. Window Installation in Culver City
Door Installation in Culver City
Door installation in Culver City ranges from arched fiberglass entry units with decorative surrounds in Spanish Revival homes to modern patio door systems in Blair Hills ranches. We source Therma-Tru and ViewLux for entry applications, with hardware and sill details selected for the moisture load the marine layer delivers. Our technicians ask before moving furniture, respect quiet hours, and explain every price before starting. Door Installation in Culver City
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Culver City
We stock and install from eight manufacturer brands: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Culver City’s coastal moisture and Spanish Revival retrofits, we most often reach for CGI, CWS, and ES Windows, with frames and glazing packages suited to marine-zone exposure. Most hardware and custom-size orders arrive within 10 – 14 business days, keeping typical Culver City jobs on schedule. our brands
Pricing for Window Company in Culver City, CA
| Service | Typical range in Culver City |
|---|---|
| Single-hung vinyl window replacement | $800 – $1,400 |
| Double-hung vinyl window replacement | $950 – $1,650 |
| Fiberglass window replacement | $1,400 – $2,400 |
| Steel casement retrofit (Spanish Revival) | $1,800 – $3,200 |
| Aluminum slider replacement (mid-century) | $900 – $1,550 |
| New construction window installation | $1,100 – $2,000 |
| Fiberglass entry door installation | $2,200 – $4,500 |
| French patio door installation | $3,200 – $5,800 |
| Sliding patio door installation | $2,600 – $4,800 |
| Custom arched door surround retrofit | $3,500 – $6,500 |
What pushes Culver City prices higher: steel casement retrofits requiring custom divided-light grids, arched door surrounds needing jamb rebuilds, and any job where an LADBS permit must be abandoned and re-pulled through Culver City’s own Building & Safety. We put every price in writing before work starts, with no change orders unless you add scope.
Neighborhoods We Serve in Culver City
Our crews work across Culver City’s full residential footprint, from the historic core to the hillside tracts. Response time from dispatch to on-site estimate typically runs same-day to next-business-day across all areas.
- Downtown Culver City
- Irving Place corridor
- Fox Hills
- Blair Hills
- Carlson Park
Service Area – Cities Near Culver City
We serve homeowners throughout the Westside and South Bay corridor. Our crews regularly work in Marina del Rey, CA for coastal condo window replacements, Inglewood, CA for mid-century home retrofits, El Segundo, CA for aerospace-area residential upgrades, and Beverly Hills, CA for estate-scale door and window installations. Dispatch and scheduling are coordinated from our Los Angeles office.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Company in Culver City
We pull permits through Culver City’s own Building & Safety Division, never LADBS. Culver City is an independent jurisdiction, and LADBS permits are not recognized here. We handle the application, plans, and inspection scheduling as part of every job. Call (562) 478-8017 to discuss your project.
We measure for historically sensitive retrofits that preserve the divided-light appearance while meeting Title 24 Climate Zone 8 energy compliance. This often means custom fiberglass or aluminum-clad units with simulated divided-light bars, installed with jamb liners that accommodate the original plaster returns. Call (562) 478-8017 for a free estimate.
Yes. Our technicians follow the C.A.R.E. values on every visit: Clean up like it’s our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work. We schedule noisy cutting and demolition outside nap times when requested, and we use pet-safe caulk and sealants where alternatives exist. Call (562) 478-8017 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Culver City Customers Say
"Replaced six windows. The crew laid runners through the house and vacuumed each room as they finished. With a crawling baby, that no mess thing meant a lot. Windows are gorgeous."
- Rosalind Kemp"Lovely windows and a tidy install. One window came in a couple weeks late from the factory, so that opening finished after the others. They kept me posted and the rest was spotless."
- Mia Donnelly"Quiet, considerate install of several windows. They cleaned the glass and the sills and vacuumed every room. You'd never know a crew had been through. House is quieter and brighter."
- Brent Sakamoto