Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Windows & Doors in Miami | Lightwell Windows & Doors
We provide independent PGT window and door service across Miami, from PGT service in Hialeah to Kendall to the Brickell corridor. The one thing that makes PGT work here different is the Miami-Dade Notice of Acceptance: every unit we install has to carry an NOA number, verified before it ships. We’re an independent PGT service provider, not a manufacturer affiliate, led by Keith Yamada. Call (562) 478-8017 for a free estimate on any PGT repair or replacement.
Why Miami Residents Choose Us for PGT Service
We’ve spent years working on PGT in Pembroke Pines and across Miami-Dade’s High Velocity Hurricane Zone. That matters because PGT frames, rollers, gaskets, and impact glass behave differently here than they do inland. We know which WinGuard aluminum units pit first on east-facing elevations along Biscayne Bay, and which vinyl lines hold up better on mid-century CBS homes in West Miami and Little Havana.
Keith Yamada got his start measuring rough openings and reading load paths at Los Angeles Trade-Technical College, and he’s been doing window and door work for going on two decades. The opening is as important as the window, and getting that part right is what the crew here sweats over. We answer the phone with a live person at (562) 478-8017, and we put every price in writing before any work starts.
Common PGT Windows & Doors Problems We Solve in Miami
- Salt-air pitting and chalky oxidation on aluminum WinGuard frames. East- and south-facing elevations near Brickell and Sunny Isles get hammered by Atlantic salt air. The aluminum pitting starts as a rough texture, then works into the powder coat. We clean, treat, and where the frame is compromised, we replace with NOA-listed units rated for corrosive-environment zones.
- Compression-set weatherstripping and shrunken sweep gaskets on older PGT sliders. Miami’s humidity and heat cycles break down rubber seals faster than inland Florida. Wind-driven Biscayne Bay rain finds the gaps at the interlock. We replace with OEM PGT gaskets where still available, or NOA-listed aftermarket ones when factory parts are back-ordered.
- Impact-laminate interlayer bubbling or edge seal failure in PGT laminated glass. Years of UV and heat cycling can cloud the interlayer or let moisture into the edge seal even though the glass looks intact. This voids the impact rating. We test, document, and replace the IG unit so the window is genuinely hurricane-rated again.
- Roller, track, and stainless-steel hardware corrosion in PGT horizontal rollers. CBS homes near the coast see hardware fail long before the frame does. Salt air works into the steel tracks and rollers until the panel binds. We replace with corrosion-rated hardware and align the interlock so the panel closes square.
- Jalousie-to-impact conversions that failed inspection. When original louvered windows get replaced with the wrong product or without NOA documentation, Miami inspection fails. We see this in Hialeah and West Miami regularly. We correct the paperwork and the installation, then call the homeowner when the carrier clears the wind-mitigation check.
PGT Service in Miami: What Local Conditions Mean for Your Equipment
Miami-Dade’s corrosive-environment zones and HVHZ rules mean a PGT replacement that would pass inspection easily in Tampa or Orlando can fail here without the correct NOA number for that exact product, frame finish, and glass make-up. Insurance carriers in Miami routinely demand proof of NOA compliance on the specific unit installed, not just the product line. We verify the notice number on every PGT order before it ships, and we keep a copy of the documentation with the homeowner’s paperwork. In West Miami, where a lot of the housing stock was poured in the late 1950s, original jalousie windows are a specific insurance problem: carriers flag them, and many non-renew policies on homes that still have them. That’s why jalousie-to-impact conversion is bread-and-butter work across older CBS neighborhoods like Hialeah and Little Havana. The homeowner isn’t just buying a window; they’re buying the documentation that keeps their policy intact.
PGT Models & Products We Service in Miami
We service PGT WinGuard Aluminum impact windows and sliding glass doors, PGT WinGuard Vinyl impact windows and doors, and the Wincore 5400 and 7700 Series vinyl lines common in mid-century CBS retrofits. We also work on PGT Affinity and Estate Series entry and French doors. Parts sourcing follows a simple rule: OEM PGT parts where they’re available, and Miami-Dade-approved, NOA-listed aftermarket hardware and gaskets when factory parts are discontinued or back-ordered. If a PGT frame is sound, we repair. If the impact rating, interlock, or NOA documentation can’t be restored, we recommend replacement and walk you through the numbers before you commit.
Every service call is covered by our 365-Day Done Right Promise: if the finished work is not right, we make it right. That’s not a marketing line; it’s stamped on the estimate.
PGT Service Pricing in Miami
PGT repair and service pricing in Miami typically runs between $180 and $480 for hardware, roller, and gasket work on a single slider or hung window. Full frame replacements on impact units start around $850 per opening and go up from there, depending on the frame material, glass make-up, and whether you’re in a corrosive-environment zone along the coast. For details, see our Window Replacement in Miami. Jalousie-to-impact conversions on CBS homes usually land between $1,100 and $1,900 per opening, which includes the new PGT WinGuard Vinyl unit, flashing, and the NOA documentation your carrier needs.
- Repair visit and diagnostic: $120 – $180
- Roller and interlock gasket replacement per panel: $180 – $340
- Weatherstripping and sweep replacement per door: $140 – $260
- IG unit replacement (laminated impact glass): $480 – $850
- Full PGT impact window replacement: $850 – $1,400 per opening
- Jalousie-to-impact conversion (CBS homes): $1,100 – $1,900 per opening
Every job comes with a written line-item price before any work starts, so there’s no invoice surprise at the end. Call (562) 478-8017 to schedule your free estimate. We walk through the numbers with you, not around you.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – PGT Windows & Doors in Miami
Yes. Every window and door installed in Miami-Dade County must carry a Miami-Dade Notice of Acceptance for the exact product, frame finish, and glass make-up. The statewide Florida Product Approval used in Orlando or Tampa is not valid here. We verify the NOA number on every PGT order before it ships, and we hand you the documentation for your insurance file. Call (562) 478-8017 and we’ll check the NOA on your existing units for free.
Yes. Jalousie conversion is one of the most common jobs we do in Little Havana, Hialeah, Kendall, and West Miami. The original louvered windows provide essentially zero hurricane resistance and insurance carriers routinely flag them. We remove the old frames, set the PGT WinGuard Vinyl impact units into the concrete block opening, flash and seal correctly, and give you the NOA paperwork. Learn more about our Window Installation in Miami. The quote also covers the rough opening prep, which is where most failed conversions go wrong. Call (562) 478-8017 for a written estimate.
Condo replacements in Miami’s high-rise corridor require condo association approval, often a structural engineer’s sign-off, and coordination with building management to schedule work in common areas. We handle the product spec and NOA verification, and we coordinate with your association on the paperwork. The lead time is longer than a single-family home, and the association may have approved product lists we need to match. Start with a call to (562) 478-8017 and we’ll help you navigate the approval steps.
Miami’s humidity runs above 70% year-round, and the salt air off Biscayne Bay and the Atlantic accelerates corrosion on steel rollers and rubber gaskets. Compression-set from heat cycling is the usual culprit on the weatherstripping, and salt pitting is what kills the hardware. We replace with corrosion-rated, NOA-listed parts so you’re not redoing the same repair every two years. Call (562) 478-8017 for an exact quote.
No. Cloudy or bubbled laminate means the interlayer has begun to fail, and the impact rating is compromised even if the glass hasn’t cracked. The edge seal is usually the entry point for moisture. We test, document the condition, and replace the IG unit with a NOA-listed assembly so the window is genuinely hurricane-rated again, not just visually intact. Call (562) 478-8017 and we’ll come take a look.
Service Areas Near Miami
Our PGT service techs regularly work in Hialeah, Little Havana, West Miami, Kendall, and along the Brickell-to-Sunny Isles corridor. We also coordinate with homeowners in PGT service in Long Beach and PGT service in Oakland when they have properties or family in the Miami area. For service beyond Miami, see our Miami service area page and our broader work in PGT sales & service.
Book Your PGT Service in Miami Today
Call Keith Yamada and the Lightwell crew at (562) 478-8017 for a free estimate on any PGT repair, replacement, or jalousie-to-impact conversion in Miami. We put the price in writing before we touch anything, and we leave the job site cleaner than we found it. That’s the standard, not a courtesy.
Written by Keith Yamada, Owner at Lightwell Windows & Doors, serving Miami with PGT service and impact-rated installations.